Cart is empty
Proudly New Zealand owned and operated since 2000
.jpg?1473757698865){kind=icon}
(04) 233-9900
Permabond ET500 5 min Epoxy
Mixed Viscosity: 17,000 mPa.s
Pot Life: 3 to 4 min
Handling Time: 4 to 6 min, Full Strength: 24 hours
Service Temperature: -40 to 80 °C
Max Gap Fill: 2.0 mm
Colour: Clear, transparent
Benefits:
- High peel strength increases design versatility
- 1:1 mix ratio of most Permabond 2-part epoxies reduces equipment costs
- Durability increases material choices
- Rapid cure increases production rates
- Room temperature cure reduces equipment & energy costs.
- Solvent free improves workplace safety
- Low odour improves workplace environment
Dispensing gun and extra nozzles can be ordered from the "Activators & Dispensers" section.
Mixed Viscosity: 17,000 mPa.s
Pot Life: 3 to 4 min
Handling Time: 4 to 6 min, Full Strength: 24 hours
Service Temperature: -40 to 80 °C
Max Gap Fill: 2.0 mm
Colour: Clear, transparent
Benefits:
- High peel strength increases design versatility
- 1:1 mix ratio of most Permabond 2-part epoxies reduces equipment costs
- Durability increases material choices
- Rapid cure increases production rates
- Room temperature cure reduces equipment & energy costs.
- Solvent free improves workplace safety
- Low odour improves workplace environment
Dispensing gun and extra nozzles can be ordered from the "Activators & Dispensers" section.
ET500 (ET500_TDS_1109.PDF, 483 Kb) [Download]
All prices are shown exclusive GST
© 2000-2024 Centreline. Powered by Centreline Ltd 2015
